Leading mixed granulation technology in the ceramic industry.

Zhongxin Technology is a cutting-edge service provider in the ceramic industry for mixed granulation preparation.

The Zhongxinke Ceramic Industry Granulator is a device that uniformly mixes powders and adhesives in an internal mixer, producing small particles of diameter under centrifugal force and high-speed rotation.

Suitable for processing viscous materials;

Stable product quality, high level of automation, and large production capacity;

Uniform particles, good strength, and high granulation rate;

High degree of automation, continuous production, high production efficiency, and low dust pollution;

Avoiding the re aggregation and settling separation of various components in the slurry can maintain the original uniformity of the slurry and obtain a uniform particle size distribution, good fluidity, and high quality of the billet powder;

The regular particle shape is beneficial for improving the density and uniformity of the green body, thereby improving the sintering performance of the green body.

Mixing is the process of evenly distributing the particles of each component involved in mixing under external forces, so that the proportion of each component in any small volume of the mixed product is consistent with the formula.

Mixers are divided into batch mixers and continuous mixers based on the continuity of the mixed materials. According to the arrangement of the working components of the mixer, they can be divided into vertical mixers and horizontal mixers; Generally speaking, the residual rate of materials in the mixer decreases with the decrease of rotor working clearance and increases with the increase of rotor diameter. It is possible to reduce residual rate by designing reasonable rotor working clearance in the mixer.

Comparison of mixing machines in the ceramic industry in the market:

The horizontal mixer has a poor mixing effect on adding high viscosity substances and cannot fully discharge the material.

The advantage of a vertical mixer is that it has a small supporting power (a 1 ton capacity mixer is equipped with approximately 1.75 kW of power); Small footprint; Can be used alone; Structurally, due to the lower inlet position, the lifting of materials is reduced, which can have a certain mixing effect on materials and can also be used as a finished product warehouse; Use it in conjunction with other equipment (such as a mixer).

The disadvantages are: long mixing time and low production efficiency; The mixing quality is greatly affected by the feeding sequence; Large residual amount.

The mixer in the ceramic industry of Sinotech can independently change the speed of components to improve mixing quality and material adaptability. During the mixing process, accurate material residence time can be adjusted, and the speed of the mixer can be adjusted. It is suitable for materials with relatively fast motion, and multi-dimensional mixing can help improve the mixing uniformity of materials. Reduce the residual amount of materials.

Applicable to:

◎ Household ceramics

◎ Architecture

◎ Bathroom ceramics

◎ Chemical ceramics

◎ Electric porcelain

◎ Special ceramics