The following are 10 common troubleshooting methods for mixed granulator equipment:

1. Unstable or insufficient pressure: Check the working status of the pressure sensor and pump to ensure normal operation of the pump, and check for any blockages or leaks in the pipelines.

2. High temperature: Check the cooling system to ensure sufficient cooling water flow, clean the cooler, and check the accuracy of the temperature sensor.

3. Uneven particle size: Adjust the speed and feeding amount of the granulator, and check if the sieve is blocked or damaged.

4. Particle yield reduction: Check if the feeder, feeding screw, and feeding system are working properly, adjust the feeding speed and amount, and check if the screen is blocked.

5. Excessive machine vibration: Check if the machine base and fixing bolts are loose, balance the rotor and screen.


6. Motor overheating or malfunction: Check if the power and wire connections of the motor are normal, clean the motor fan and cooler, and check the motor bearings and insulation.

7. Excessive machine noise: Check if the belts, chains, and gears of the transmission system are loose or worn, lubricate and replace necessary components.

8. Blockage of feeder: Clean the feeder and feeding screw, and check if there is any foreign object accumulation in the hopper and feeding system.

9. Poor material flow: Check if the hopper and feeding system are blocked, adjust the speed and feeding amount of the feeder and feeding screw.

10. Control system malfunction: Check the sensors and electrical components of the control system, check the electrical connections and wiring, and repair or replace faulty components.